Aufrufe
vor 1 Jahr

Horizon Stehständer Anleitung

7.2 How to attach the

7.2 How to attach the tray in supine standing 7.3 How to attach the sandals 7.4 How to attach the headsupport & extended headrest bracket in Supine 7.5 How to attach the headsupport in prone The Tray is attached to and removed from the frame by the metal brackets located below the chest pad. To attach the tray slide the metal bars into the receiving tubes to the required depth and secure by tightening the knobs (a) on either side. Each sandal is attached to the footplate individually with a single fixing bolt. Remove the sandals from their packaging and unscrew the plastic knob and washers. Place the sandal on the footplate locating the fixing bolt through the slot, place the rubber washer on first and then the metal washer. Secure in place with the plastic knob (a). To attach and height adjust, slide the square tubing into the top of the central spine on the backrest. To lock the head support push the locking lever down until it touches the metal spine (b). To remove simply reverse this process. The extended headrest, the contoured head support and the Whitmyer Pro-Series range of headsupports can also be attached to the frame as detailed above. If headsupport is needed in prone standing the Leckey Interface Frame (LIF) can be used with Horizon Stander. The LIF is attached to and removed from the frame by the metal brackets located below the chest pad. To attach, slide the metal bars into the receiving tubes to the required depth and secure by tightening the knobs on either side. Always use caution when making this adjustment, as fingers could become trapped in the slot while positioning. After use locking lever may need to be fine tuned to ensure secure locking. To do this lift up the lever and turn the nut (c) while holding the lever in a fixed position. Push the lever back down to check if it locks the tube securely. Repeat the process as necessary. Please refer to the specific user manual on the Leckey Interface Frame to safely position the frame and its accessories. This frame will also accommodate the Whitmyer pro-series range of headsupports. Always use caution when making this adjustment, as fingers could become trapped in the receiving tube while positioning. B C A A